Water Pumps, Inlet Systems & Controllers

Awning Rail Water Pump Holder made in waterproof quality nylon. Simply attach to the lower awning rail to keep your pump off the ground and protected whilst refilling your water container. Width 17cm...

The compact economically priced Brunner Aquatic 10L 12v Submersible Water Pump with a flow rate 10 litres per minute at 0.6bar. ABS housing. Quiet and powerful. Complete with 90cm connection cable. 12V...

The Comet Elegant is a neat low volume 12v Submersible water pump, ideal to replace a faulty unit or to just keep as a spare. It can also be used as a replacement pump in many Thetford toilets. This slimline...

The universal Fiamma A20 Expansion Tank is an ideal addition to all pressure switch 12v pumps as it eliminates the pulsating operation and supplies a surge free constant flow of water at an even pressure,...

Fiamma Water Cap is a water filler cap with lock in a choice of black or white colours to match your motorhome that complies with European closure system standards.

The High Quality Flojet 12v "Triplex Diaphragm" Automatic Water Pump, as used by the Swift Group on their range of caravans & motorhomes.

Haba Portland Water Inlet Cap with quick connection for Mass Water Systems this smaller diameter inlet cap is fitted on many European motorhomes, such as Chausson, LMC, Dethleffs.

Haba Reinland Water Inlet Cap with quick connection to fit most common caravan and motorhome water inlets. The Reinland cap has a built-in overpressure valve. Because of this valve the cap is usable for...

The Reich Twin Submersible Pump contains two pump motors, which ensures great power with regard to water flow and pressure and reliablity. In the event of failure of one of the pump motors, the Twin pump...

Shurflo 1/2" Elbow & Straight Connectors with threaded connection for direct connection to pump water inlet and outlet. Nozzles designed to fit 1/2" flexible water hose and secured with jubilee clamp...

The Shurflo Trail King 7L 20Psi and 30Psi pumps are renowned in the leisure vehicle and marine industry. Delivers 7 litres per minute at free flow for only 1 amp and self primes vertically to 2.1m. These...

The Ultraflow Compact Housing conversion kit allows you to effortlessly convert your existing compact housing system whether it be the old carver crystal system or another brand, without the necessity...

The Ultraflow filter housing is used to allow you to filter the water supplied from your water container or mains waterline into your vehicle. Fitted as standard by majority of UK Manufacturers including...

At the end of 2008 the Carver Crystal II water system was discontinued after many years of continuation from Truma. The Truma Ultraflow housing Conversion Kit allows you to effortlessly convert your existing...

The Truma Ultraflow Pump Assembly is an ergonomic and simple solution that enables you to pump water into your vehicle from an external water container. Compatible for both the Ultraflow Filter Housing...

Water Intake Housing in white coloured finish for use with Ultraflow inlet hose with strainer when an onboard pump is fitted to the vehicle

The Ultrafow Adaptor Plate is a loose plate that enables you to easily convert your original Crystal 1 filter housing over to the current Ultraflow filter housing.

The Whale High Flow In-Line electric water pump is an inexpensive way to enhance your water system, built to the highest quality standards with ABS moulded body and robust motor. This is a compact, quiet,...

The market leading Whale High Flow self priming water pump is manufactured to the highest quality with robust motors to offer a most compact, very quiet, lightweight high performance electric impeller...

The Whale Standard Submersible Water Pump is manufactured to very high standards and with its simple compact design is ideal for basic one outlet applications. Ideal to replace a faulty unit or to just...